HOW TO BEND ACRYLIC PLEXIGLASS ?
Author:aecfun  Published in:2017-12-29 9:49:38  Click volume:

 What is Acrylic Bending Machine?

Acrylic is one of the frequently-used plastic plates in the market at present, so people call the device which can bend the acrylic into shapes Acrylic Bending Machine.

 

In the sense of the principle, it can bend the acrylic into shapes by heating and softening the plates. So it is also called plastic heat bender. Besides acrylic ,plastic plate such as plexiglass, PVC,PC,PP etc can also be bent. Widely speaking, its also called plastic bender.

What can Acrylic Bending Machine do?

Nowadays acrylic products are very common in our daily life. For example, when scanning a QR code in a shop, the board of the QR code is made of acrylic. The wallet display stand in shopping mall is made of acrylic. When buying clothes, the price tag on the side is also acrylic. 

Acrylic products are almost everywhere, including making a goods shelf and machine cover.

It is widely used in school technical curriculum, architectural models, decoration project,sign making, wrapping corner columns, wrapping fish tank edges, doors and windows edges, display cabinet, goods shelves in supermarket, advertising lamp boxes and crafts making ,etc.

Whats special of the Acrylic Bending Machine from AECFUN?

1. Adopted advanced infrared heating technology and circulating water cooling

system. With Leakage protection and of high security.

2. After per-heating for only 1 minute, it can set to work. The highest temperature

is 600℃。

3. Heating speed is very fast. Normally a thickness of 3mm plate can be softened in

15 seconds.

4. According to different bending needs, heating gaps width can be adjustable from

0-20mm.

5. Equipped with angle adjuster & length adjuster, ensure bending standardization

and unification. Suitable for mass production.

6. Two sizes are available. ABM 700 and ABM1300,the length of heating tube is

respectively 0.7m and 1.3m.

Compared with fully-automatic machine ,whats the advantages of the Acrylic Bending Machine? 

1. Small in size, flexible, easy to move to the spot for some special needs.

2. Easy to start up. Once inserting 220 Voltage, it can work. No need to connect.

3. Easy operation. No need to occupy too much space, one desk is enough. Basically,

there is no need to specially train the operator . Don't worry about the loss of people.

4. Small occupied area. No need to occupy too much space, one desk is enough.

5. Convenient small batch production and strong individuation. It can set to work once

starting it up.

6. Basically no after-sale services. Even if there is a need, thats to change a

heating tube and so on. The heating pipe wiring is not divided into positive and negative poles, and

it can also operate by itself, so as to reduce the downtime due to maintenance. 

 

consulting hotline  :

 0086-573-82602726 82602776

email: info6@aecfun.com

分享到:
Aecfun Commercial&Equipment Co., Ltd Copyright © 2015 aecfun. All Rights Reserved.
Room 2107, Fuyue Mansion, No.28 Zhonghuan West Road, Jiaxing, China. - Tel:0086-573-82602726 82602776 - Fax:0086-573-82602796 - E-mail:admin@aecfun.com